830 W continuous, three-phase supply, IP65 sealed
The SH30703M11A2200 is a Schneider Electric SH3 series servo motor delivering 830 W continuous power and requiring a three-phase supply. The motor body is IP65-rated per IEC 60034-5, with the shaft bushing also IP65 and the housing IP67 — suitable for washdown environments in food processing or packaging lines where coolant or moisture ingress is a risk. Nominal torque varies with supply voltage: 3.05 Nm at 115 V single phase, 2.95 Nm at 230 V single phase, and 2.63 Nm at 400 V or 480 V three phase. Peak stall torque reaches 11.3 Nm across the 115–480 V three-phase range, giving the motor headroom for acceleration under load without saturating the drive.
Absolute single-turn SinCos Hiperface encoder — no homing cycle needed
The encoder is an absolute single-turn SinCos Hiperface type, meaning the motor reports its absolute position within one revolution on power-up — no reference-run or homing sequence required after a power cycle. This shaves time off the cycle budget in pick-and-place or palletizing cells where the robot must know the axis position immediately.
The motor mounts on an international standard flange with a 70 mm flange size and a 60 mm centring collar diameter. The shaft is 14 mm diameter with a parallel key, and the overall length is 220 mm. These dimensions match the SH30703M sizing reference — confirm the mating drive and coupling before committing the BOM line.