Frame size and mounting — 70 mm flange, 254 mm body
The SH30703M12F2100 carries a 70 mm flange (2.8 in) with a 60 mm centring collar and 5.5 mm mounting holes — the standard IEC metric pattern for this power class. Overall body length is 254 mm (10 in), which sets the envelope for retrofit into existing machine beds or gearbox adapters. The shaft is 14 mm diameter with a parallel key, 30 mm engagement length, and a 5 mm key width — a common interface for couplings, pulleys, or pinions in light-to-medium duty indexing and positioning axes.
Encoder and feedback — absolute multiturn SinCos Hiperface
This motor ships with an absolute multiturn SinCos Hiperface encoder — the feedback protocol that carries position and speed data over a hybrid analog/digital interface. It is the standard for Schneider's Lexium 32 and BDH servo drives; confirm the drive's encoder input card supports Hiperface before mating. The absolute multiturn count eliminates the need for a home-reference cycle after power loss — the axis resumes from the last known position, which saves cycle time on multi-axis pick-and-place or rotary indexing stations.
Torque and speed across supply voltages
Nominal torque is not a single number — it depends on the supply. At 400 V or 480 V three-phase, the motor delivers 2.63 N·m (23.28 lbf·in) continuous; on single-phase 230 V it rises slightly to 2.95 N·m, and on 115 V single-phase it reaches 3.05 N·m. The holding brake is rated 3 N·m, matching the highest single-phase torque. Rated speed scales with voltage: 750 rpm at 115 V single-phase, 1500 rpm at 230 V single-phase, 3000 rpm at 400 V three-phase, and 3600 rpm at 480 V three-phase. The motor can spin up to 8000 rpm mechanically — useful for short-duration overspeed moves if the drive supports field weakening. Continuous stall torque is 2.94 N·m across the 115–480 V three-phase range, with a continuous stall current of 2.1 A. Peak stall torque reaches 11.3 N·m — roughly 3.8× the continuous rating — for acceleration and deceleration transients.
Environmental sealing and cooling
Both the motor body and the shaft bushing are rated IP65 per IEC 60034-5 — the shaft seal keeps washdown water and airborne dust out of the bearing cavity. This makes the SH30703M12F2100 a candidate for food-processing conveyors, packaging lines, or outdoor gantries where hose-down cleaning is routine. Cooling is natural convection — no external fan or forced air. The continuous power rating of 830 W assumes free airflow around the motor; derate if it is enclosed in a tight cabinet or mounted with the flange against a heat-sinking surface.
No stock-holding claim is made — each order is quoted individually.