Skip to main content
Log in
Schneider Electric SH30703P1AF3000

Schneider SH30703P1AF3000 PacDrive 3 servo motor, 1330 W, 8000 rpm

MPNSH30703P1AF3000
Obsolete

Schneider SH30703P1AF3000 Portable Heaters — now discontinued, supplied from remaining surplus and broker stock.

$2,595.00Ref. price · indicative, final on quote
Schneider Electric SH30703P1AF3000 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

SH30703P1AF3000 key specifications
ParameterValue
Encoder typeAbsolute single turn Hiperface DSL
Type of coolingNatural convection
Product or component typeServo motor
Supply voltage115...480 V
Maximum current irms17 A
Continuous stall current4.1 A
Continuous power1330 W
Brake pull-in power7 W
Nominal output power830 W 230 V single phase 1330 W 400 V three phase 1330 W 480 V three phase
Number of motor poles3
PhasesThree phase
Network number of phases3

All specifications

SH30703P1AF3000 additional specifications
ParameterValue
IP degree of protectionIP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5
Mounting supportInternational standard flange
Mounting holes diameter0.2 in (5.5 mm)
Number of mounting holes4
Circle diameter of the mounting holes3.2 in (82 mm)
Electrical connectionRotatable right angled connector
Key width0.2 in (5 mm)
Centring collar depth0.10 in (2.5 mm)
Length9.7 in (246 mm)
CategoryUS1PC5218359
Shaft endParallel key
Shaft length1.2 in (30 mm)
Holding brakeWith
Nominal speed3000 rpm 230 V single phase 6000 rpm 400 V three phase 7200 rpm 480 V three phase
Rotor inertia0.807 kg.cm²
Holding torque26.6 lbf.in (3 N.m)
Nominal torque24.8 lbf.in (2.8 N.m) 230 V single phase 18.6 lbf.in (2.1 N.m) 400 V three phase 18.6 lbf.in (2.1 N.m) 480 V three phase
Shaft diameter0.6 in (14 mm)
Torque constant0.72 N.m/A 248 °F (120 °C)
Sizing referenceSH30703P
Back emf constant49 V/krpm 68 °F (20 °C)
Device short nameSH3
Motor flange size2.8 in (70 mm)
Peak stall torque100.01 lbf.in (11.3 N.m) 115...480 V three phase
Stator inductance14.6 mH
Stator resistance2.7 Ohm
Maximum axial force fa160 N
Temperature copper hot266 °F (130 °C)
Continuous stall torque26.02 lbf.in (2.94 N.m) 115...480 V three phase
Maximum radial force fr1050 N 1000 rpm
Centring collar diameter2.4 in (60 mm)
Maximum mechanical speed8000 rpm
Speed feedback resolution262144 points/turn

Product details

Overview

The SH30703P1AF3000 is a Schneider PacDrive 3 servo motor rated 1330 W on 400/480 V three-phase, delivering 2.94 N.m continuous torque up to 8000 rpm. It carries an absolute single-turn Hiperface DSL encoder and an integral holding brake.

The 2.94 N.m torque holds across the 115...480 V three-phase range, with a rotor inertia of 0.807 kg.cm² and a back EMF constant of 49 V/krpm at 68 °F (20 °C). Max radial force is 1050 N at 1000 rpm; max axial force is 160 N. The 14.6 mH inductance and 2.7 Ohm resistance inform drive tuning for the 17 A peak current.

MPN
SH30703P1AF3000