Skip to main content
Log in
Schneider Electric SH31002P1BA3000

Schneider SH31002P1BA3000 PacDrive 3 servo motor, 1930 W, 5.8 N.m

MPNSH31002P1BA3000
Obsolete

Schneider Electric PacDrive 3 SH31002P1BA3000 servo motor, 4-pole, 1930 W at 400/480 V three-phase, 5.8 N.m rated torque, 6000 rpm max, IP65, Hiperface DSL absolute multiturn encoder, parallel key shaft, no brake.

$2,610.00Ref. price · indicative, final on quote
Schneider Electric SH31002P1BA3000 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

SH31002P1BA3000 key specifications
ParameterValue
Encoder typeAbsolute multiturn Hiperface DSL
Type of coolingNatural convection
Product or component typeServo motor
Supply voltage115...480 V
Maximum current irms17.1 A
Continuous stall current4.8 A
Continuous power1930 W
Nominal output power1090 W 230 V single phase 1930 W 400 V three phase 1930 W 480 V three phase
Number of motor poles4
PhasesThree phase
Network number of phases3
IP degree of protectionIP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5

All specifications

SH31002P1BA3000 additional specifications
ParameterValue
Mounting supportInternational standard flange
Mounting holes diameter0.4 in (9.0 mm)
Number of mounting holes4
Circle diameter of the mounting holes4.5 in (115 mm)
Electrical connectionRotatable right angled connector
Key width0.2 in (6 mm)
Centring collar depth0.1 in (3.5 mm)
Length8.05 in (204.5 mm)
CategoryUS1PC5218359
Shaft endParallel key
Shaft length1.6 in (40 mm)
Holding brakeWithout
Nominal speed2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase
Rotor inertia2.31 kg.cm²
Nominal torque46.02 lbf.in (5.2 N.m) 230 V single phase 40.7 lbf.in (4.6 N.m) 400 V three phase 38.9 lbf.in (4.4 N.m) 480 V three phase
Shaft diameter0.7 in (19 mm)
Torque constant1.21 N.m/A 248 °F (120 °C)
Sizing referenceSH31002P
Back emf constant77 V/krpm 68 °F (20 °C)
Device short nameSH3
Motor flange size3.9 in (100 mm)
Peak stall torque162.0 lbf.in (18.3 N.m) 115...480 V three phase
Stator inductance13.5 mH
Stator resistance2.4 Ohm
Maximum axial force fa300 N
Temperature copper hot266 °F (130 °C)
Continuous stall torque51.3 lbf.in (5.8 N.m) 115...480 V three phase
Maximum radial force fr1840 N 3000 rpm 2660 N 1000 rpm 2110 N 2000 rpm
Centring collar diameter3.7 in (95 mm)
Maximum mechanical speed6000 rpm
Speed feedback resolution262144 points/turn x 4096 turns

Product details

Overview

The SH31002P1BA3000 is a Schneider PacDrive 3 servo motor in a 100 mm frame, delivering 5.8 N.m continuous torque and 1930 W on a 400/480 V three-phase supply, with a top speed of 6000 rpm. It carries an absolute multiturn Hiperface DSL encoder resolving 262144 points per turn over 4096 turns, and is sealed to IP65 with a parallel key shaft and no holding brake.

The motor draws a maximum current of 17.1 A and a switching current of 4.8 A, with a 4-pole construction that suits direct drive or geared applications requiring high torque density. Compared to the MH30701P01A2200, the SH31002P1BA3000 delivers higher torque (5.8 N.m) and current capacity (17.1 A), making it the correct choice for heavier loads.

MPN
SH31002P1BA3000