Schneider Electric SH31003M02A2100
MPNSH31003M02A2100
Obsolete
SH3 servomotor, 100mm, 3 stacks, high Torque, smooth Shaft, SinCos Multiturn 128, no Brake, angular, IP65/65
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Encoder type | Absolute multiturn SinCos Hiperface |
| Type of cooling | Natural convection |
| Product or component type | Servo motor |
| Supply voltage | 115...480 V |
| Maximum current irms | 14.7 A |
| Output current 3s peak | 14.7 A |
| Continuous stall current | 3.4 A |
| Continuous power | 1500 W |
| Nominal output power | 410 W at 115 V single phase 790 W at 230 V single phase 1470 W at 400 V three phase 1700 W at 480 V three phase |
| Number of motor poles | 4.0 |
| Network number of phases | 3 |
| IP degree of protection | IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 |
All specifications
| Parameter | Value |
|---|---|
| Mounting support | International standard flange |
| Mounting holes diameter | 9.0 mm |
| Number of mounting holes | 4 |
| Circle diameter of the mounting holes | 115 mm |
| Electrical connection | rotatable right angled connector |
| Key width | 6 mm |
| Centring collar depth | 3.5 mm |
| Length | 240.5 mm |
| Inertia | 0.0 kg.cm² of brake 0.0 kg.cm² of motor |
| Shaft end | Smooth shaft |
| Shaft length | 40 mm |
| Holding brake | Without |
| Nominal speed | 500 rpm at 115 V single phase 1000 rpm at 230 V single phase 2000 rpm at 400 V three phase 2400 rpm at 480 V three phase |
| Rotor inertia | 3.22 kg.cm² |
| Nominal torque | 7.8 N.m at 115 V single phase 7.5 N.m at 230 V single phase 7 N.m at 400 V three phase 6.76 N.m at 480 V three phase |
| Shaft diameter | 19 mm |
| Torque constant | 2.35 N.m/A at 120 °C |
| Sizing reference | SH31003M |
| Back emf constant | 148 V/krpm at 20 °C |
| Device short name | SH3 |
| Motor flange size | 100 mm |
| Peak stall torque | 28.3 N.m at 115...480 V three phase |
| Stator inductance | 49.8 mH |
| Stator resistance | 5.3 Ohm |
| Maximum axial force fa | 160 N |
| Temperature copper hot | 130 °C |
| Continuous stall torque | 8 N.m at 115...480 V three phase |
| Maximum radial force fr | 1050 N at 1000 rpm 830 N at 2000 rpm 730 N at 3000 rpm 660 N at 4000 rpm |
| Centring collar diameter | 95 mm |
| Maximum mechanical speed | 6000 rpm |
| Speed feedback resolution | 128 periods |
MPN
SH31003M02A2100