Skip to main content
Log in
Schneider Electric SH31003P0BA3000

Schneider SH31003P0BA3000 PacDrive 3 servo motor, 2400 W, 8 N.m, 6000 rpm

MPNSH31003P0BA3000
Obsolete

Schneider Electric PacDrive 3 SH31003P0BA3000 servo motor, 2400 W, 8 N.m continuous torque, 6000 rpm max, 28.3 A max, 4-pole, three-phase, absolute multiturn Hiperface DSL encoder, IP65 motor, smooth shaft, no holding brake, 100 mm frame.

$2,950.00Ref. price · indicative, final on quote
Schneider Electric SH31003P0BA3000 datasheet (PDF)
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
How we verify every order →

Specifications

SH31003P0BA3000 key specifications
ParameterValue
Encoder typeAbsolute multiturn Hiperface DSL
Type of coolingNatural convection
Product or component typeServo motor
Supply voltage115...480 V
Maximum current irms28.3 A
Continuous stall current6.6 A
Continuous power2400 W
Nominal output power1470 W 230 V single phase 2390 W 400 V three phase 2390 W 480 V three phase
Number of motor poles4
PhasesThree phase
Network number of phases3
IP degree of protectionIP65 motor: conforming to IEC 60034-5 IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5

All specifications

SH31003P0BA3000 additional specifications
ParameterValue
Mounting supportInternational standard flange
Mounting holes diameter0.4 in (9.0 mm)
Number of mounting holes4
Circle diameter of the mounting holes4.5 in (115 mm)
Electrical connectionquicklock straight connector
Centring collar depth0.1 in (3.5 mm)
Length9.5 in (240.5 mm)
CategoryUS1PC5218359
Shaft endSmooth shaft
Shaft length1.6 in (40 mm)
Holding brakeWithout
Nominal speed2000 rpm 230 V single phase 4000 rpm 400 V three phase 4800 rpm 480 V three phase
Rotor inertia3.22 kg.cm²
Nominal torque62.0 lbf.in (7 N.m) 230 V single phase 50.4 lbf.in (5.7 N.m) 400 V three phase 45.1 lbf.in (5.1 N.m) 480 V three phase
Shaft diameter0.7 in (19 mm)
Torque constant1.22 N.m/A 248 °F (120 °C)
Sizing referenceSH31003P
Back emf constant77 V/krpm 68 °F (20 °C)
Device short nameSH3
Motor flange size3.9 in (100 mm)
Peak stall torque250.5 lbf.in (28.3 N.m) 115...480 V three phase
Stator inductance9.4 mH
Stator resistance1.43 Ohm
Maximum axial force fa740 N
Temperature copper hot266 °F (130 °C)
Continuous stall torque70.8 lbf.in (8 N.m) 115...480 V three phase
Maximum radial force fr3570 N 2000 rpm 3120 N 3000 rpm 4500 N 1000 rpm
Centring collar diameter3.7 in (95 mm)
Maximum mechanical speed6000 rpm
Speed feedback resolution262144 points/turn x 4096 turns

Product details

Overview

The SH31003P0BA3000 is a Schneider PacDrive 3 servo motor rated 2400 W continuous power with 8 N.m of continuous torque and a top speed of 6000 rpm, fed from a three-phase supply. It carries an absolute multiturn Hiperface DSL encoder resolving 262144 points per turn across 4096 turns, and the motor enclosure is rated IP65 per IEC 60034-5 with an IP54 shaft bushing. This build code ships with a smooth shaft and no holding brake, mounted on a 100 mm international standard flange.

The 8 N.m continuous torque and 6000 rpm top speed suit direct-drive or geared axes in packaging, material handling, and general motion control; the 28.3 A maximum current and 2400 W power define the drive sizing. Rotor inertia is 3.22 kg.cm², winding resistance 1.43 Ohm, inductance 9.4 mH, and back EMF constant 77 V/krpm at 20 °C — these values set the electrical time constant and drive tuning parameters. Maximum axial force is 740 N; maximum radial force is 3570 N at 2000 rpm, 3120 N at 3000 rpm, and 4500 N at 1000 rpm — check bearing life for overhung loads.

MPN
SH31003P0BA3000