The SH31004P01F1200 is a three-phase servo motor from Schneider Electric's SH3 series, built with an integral holding brake and an absolute single-turn SinCos Hiperface encoder. That encoder type means the drive knows the rotor position at power-up without a homing sequence — a time-saver on multi-axis lines where every second of commissioning counts. Continuous power is 2500 W, but the nominal torque varies with the supply voltage: 9.9 N·m at 115 V single phase, 7.9 N·m at 400 V three phase, and 6.9 N·m at 480 V three phase. The holding brake is rated at a flat 12 N·m regardless of line voltage — it holds the load at rest without motor power. The motor is wound for multi-voltage operation — nominal speed climbs from 750 rpm at 115 V single phase to 3600 rpm at 480 V three phase. Pair it with a drive rated for the line voltage you actually have; the torque-speed curve shifts with the supply, not the motor windings.
Sealing, feedback, and flange — field-fit details
IP65 on the motor body and shaft bushing, IP67 on the housing — both per IEC 60034-5. That means the motor survives washdown on a food or beverage line as long as the mating connector is also IP-rated. The shaft is smooth, 24 mm diameter, 50 mm length. No keyway — the coupling or pulley clamps onto the smooth shaft. Mounting is via an international standard flange, 100 mm flange size, with a 95 mm centring collar and 9 mm mounting holes on a 3.5 mm centring collar depth. The electrical connection is a straight connector — no right-angle plug to fight in a tight cabinet.