Speed and torque across the supply range
The SH31004P12A1100 delivers a nominal speed of 3000 rpm on 400 V three-phase supply, with a corresponding nominal torque of 69.9 lbf.in (7.9 N.m) and nominal output power of 2480 W. On 480 V three-phase, speed climbs to 3600 rpm, torque drops to 61.07 lbf.in (6.9 N.m), and power reaches 2600 W. For single-phase 115 V or 230 V operation, nominal speed is 750 rpm or 1500 rpm respectively, with torque and power scaling accordingly. Continuous stall torque is 88.5 lbf.in (10 N.m) across the 115...480 V three-phase range, with a peak stall torque of 358.5 lbf.in (40.5 N.m) — a 4× overload margin for acceleration and emergency stops.
Electrical parameters for drive tuning
The absolute multiturn SinCos Hiperface encoder provides position feedback without a home cycle after power-up — essential for applications where the machine must resume position after a power loss without re-referencing. Maximum continuous current Irms is 32.3 A, with a 3-second peak current of 32.3 A — the drive must be sized to supply this peak for acceleration profiles.
Mechanical integration and environmental sealing
The motor uses an international standard flange with a 100 mm (3.9 in) flange size and a 24 mm (0.9 in) shaft diameter with a parallel key. Overall length is 276.5 mm (10.9 in). The centring collar diameter is 95 mm (3.7 in) with a 3.5 mm (0.1 in) depth — match this to the mating pilot bore for concentric alignment. Cooling is by natural convection; no external fan is required, so there is no additional noise or maintenance item.