Headline duty — 5.5 kW continuous, voltage-dependent curves
The Schneider SH32051P01A2100 is the SH32051P frame in the SH3 series, a three-phase servo motor rated 5500 W continuous power with natural convection cooling and an 8.07 in (205 mm) international-standard flange.
Drive-loop sizing — current, torque, and electrical constants
Continuous stall current is 21 A against a maximum Irms of 87.2 A and a 3-second peak output current of 87.2 A, so the amplifier must deliver well over double the continuous figure to clear acceleration transients without saturating the current loop.
Feedback, connection, and environmental rating
Sealing is IP65 on both the motor body and the shaft bushing per IEC 60034-5, so the unit withstands water-jet washdown typical of food-and-bev lines and outdoor cabinets, provided the mating connector carries equivalent sealing; the 5-pole stator and the absence of a holding brake keep the through-bore free for the encoder-bearing shaft.
Sourcing posture for the SH32051P01A2100
For tender documentation the verified evidence is the spec set above — 5500 W continuous, three-phase, IP65, Hiperface encoder, 205 mm flange, peak torque 110 N.m — fully compliant with the IEC 60034-5 sealing standard cited on the rating line, with traceability through the SH32051P sizing reference and SH3 device short name.