Form factor: 205 mm flange, 38 mm keyed shaft
The SH32052P11A2100 is a SH3-series three-phase servo motor built around a 205 mm international-standard flange with a 180 mm centring collar and 14 mm mounting holes, so it drops onto the same machine footprint common to mid-power servo integrations. The 38 mm parallel-key shaft projects 80 mm from the face with a 10 mm key, sized to mate with a gearbox or coupling that the buyer already has on the BOM — confirm the coupling bore before specifying. At 405 mm long and naturally convected (no integrated fan), the motor relies on the machine frame to shed heat — cabinet ventilation and a non-ducted mounting surface are part of the thermal design, not optional. The straight connector variant is standard; a rotatable right-angled connector ships as an alternative on the same frame, which matters when the cabinet harness bend radius is tight.
Torque and power envelope across supply rails
Continuous power peaks at 7980 W on 400 V three-phase and stays close at 7140 W on 480 V, so the 400 V rail is the natural fit when the drive is sized for maximum shaft work.
Feedback, sealing, and shaft loading
IP65 is maintained on both the motor body and the shaft bushing per IEC 60034-5, so the unit tolerates washdown and dust ingress typical of food-and-bev or outdoor-skid installations, provided the mating connector keeps its own seal. Shaft loading is bounded by 4200 N radial at 1000 rpm, falling to 3330 N at 2000 rpm and 2910 N at 3000 rpm, and by 740 N axial — a belt drive or pinion must be placed as close to the shaft shoulder as the application allows to keep the overhung load within the curve.
Lifecycle status and how to order
For MRO spares or production-line replacements, a single-unit order is the typical entry; volume pricing on panel builds is handled at quote time.