The SH32052P11F2100 is a 5-pole servo motor from the SH3 series, rated 7900 W continuous power. That continuous rating is the thermal ceiling for sustained duty — the motor can hold this output indefinitely without exceeding the 130 °C copper hot-spot temperature. Nominal torque and speed both shift with the supply voltage: at 480 V three-phase it delivers 251.4 lbf.in (28.4 N.m) at 2400 rpm; at 115 V single-phase the same motor gives 545.2 lbf.in (61.6 N.m) but only 500 rpm. The peak stall torque is 1947.2 lbf.in (220 N.m) across the 115...480 V three-phase range — this is the short-duration limit for acceleration or emergency stop.
Encoder, brake, and IP65 — integration constraints
The motor ships with an absolute single-turn SinCos Hiperface encoder — this gives position feedback at power-up without a homing cycle, critical for multi-axis coordinated motion. The holding brake is rated 708.06 lbf.in (80 N.m), sized to hold the rated load on a vertical axis without servo power. IP65 protection on both the motor body and the shaft bushing means the unit handles washdown — suitable for food-and-beverage lines or outdoor conveyor sections where hose-down cleaning is routine. The 205 mm flange and 38 mm shaft with parallel key match standard international mounting patterns; the centring collar depth is 4 mm.