What is the SH32052P12F1200
SH32052P12F1200 is a member of the SH3 servo motor family, sized against the SH32052P reference, intended for three-phase drive operation. Its key working point is a holding torque of 708.06 lbf.in (80 N.m), backed by a continuous stall torque of 574.4 lbf.in (64.9 N.m) and a peak stall torque ceiling of 1947.2 lbf.in (220 N.m) across the 115 to 480 V range.
Current draw, torque constant, and what the drive must deliver
Maximum current Irms is 96.8 A and the 3-second peak output current is 96.8 A as well, so the upstream drive stage must sustain that envelope without saturating during the peak stall interval. Torque constant is 2.52 N.m/A at 248 °F (120 °C) winding temperature — that is the slope the drive uses to convert commanded current into shaft torque, and the back-EMF constant of 161 V/krpm at 68 °F (20 °C) is the inverse relationship that sets the bus voltage headroom at top speed.
Mechanical envelope, shaft, and the loads the bearings have to absorb
Shaft end is a parallel-key 1.5 in (38 mm) diameter, 3.1 in (80 mm) long with a 0.4 in (10 mm) key, and the bearing set is rated for a maximum axial force Fa of 740 N and a maximum radial force Fr that steps from 4200 N at 1000 rpm down to 2910 N at 3000 rpm — drive sizing has to stay inside that envelope at the operating point.
Encoder, brake, and ingress in a washdown environment
Feedback is an absolute multiturn Sin/Cos Hiperface encoder terminated through a straight connector, which is the interface the drive indexes against on first commissioning; the holding brake is integrated into the motor stack.
Sourcing posture for the SH32052P12F1200
Lifecycle stage is recorded as current, with a single unit per package, so the line is orderable against the BOM rather than pulled from spot stock.