Speed and torque across supply voltages
The SH32053P11A2100: This SH3-series servo motor delivers nominal torque that varies with the supply: 84.9 N·m at 115 V single-phase (500 rpm), 74.4 N·m at 230 V single-phase (1000 rpm), 50.7 N·m at 400 V three-phase (2000 rpm), and 40.2 N·m at 480 V three-phase (2400 rpm). The 10.6 kW continuous power rating holds at the 400 V three-phase connection, where most line applications land. Peak stall torque reaches 330 N·m across the 115–480 V three-phase range, backed by a 136.1 A peak current capability — enough for aggressive acceleration profiles in indexing or cut-to-length applications.
Encoder feedback and environmental sealing
The absolute single-turn SinCos Hiperface encoder provides position feedback without a home cycle on power-up — a time-saver on multi-axis lines where homing sequences stall production. The IP65 rating on both the motor body and shaft bushing (per IEC 60034-5) means washdown environments or dusty mill floors won't compromise the winding or bearing seals. Natural convection cooling keeps the design simple — no fan to clog or fail — but thermal budget must be respected: the copper hot-spot limit is 130 °C, and the stator resistance of 0.2 Ω sets the I²R heating at full current.
Mounting and mechanical interface
The motor mounts to an international standard flange with a 180 mm centring collar and four 14 mm mounting holes on a 205 mm flange diameter. The 38 mm shaft carries a parallel key, 80 mm shaft length, and a 10 mm key width — standard dimensions that match most gearbox input couplings without adapter bushings. Maximum radial force at the shaft nose is 4500 N at 1000 rpm, derating to 3120 N at 3000 rpm — a critical number for belt-drive or overhung-load applications where bearing life depends on staying below the Fr curve.