The SH32053P11A2200: This SH3-series servo motor delivers 10600 W continuous power, with nominal torque ranging from 751.4 lbf·in at 115 V single-phase down to 355.8 lbf·in at 480 V three-phase — the torque curve drops as line voltage and phase count go up, so the real-world pull depends on your supply. Rated for three-phase supply, the motor spins at 2400 rpm on 480 V three-phase, or 2000 rpm on 400 V three-phase; single-phase 115 V drops that to 500 rpm.
IP65/IP67 and natural convection — built for grease and washdown
The motor body carries IP65 per IEC 60034-5, the shaft bushing is also IP65, and the housing hits IP67 — so it handles washdown and dust without a fan or forced air.
Encoder and connection — Hiperface single-turn absolute
The absolute single-turn SinCos Hiperface encoder gives position feedback without a home cycle on power-up — the rotatable right-angled connector lets you route the cable without a right-angle adapter. Stator inductance is 2.05 mH and stator resistance is 0.2 Ohm, so the drive tuning parameters will be in the medium-inductance range; peak current is 136.1 A for 3 s.