It carries a 36 kA breaking capacity at 800 V AC (performance level F), making it suitable for solar distribution and general power distribution in industrial panels. The breaker is certified to EN/IEC 60947-2 and EN/IEC 60947-2 Annex H, with a rated insulation voltage of 1250 V AC and pollution degree 3 per IEC 60664-1 — meaning it's designed for industrial environments where conductive pollution is expected.
For higher ambient temperatures, derating applies — the trip unit is electronic, so it's more stable than a thermal-magnetic type but still follows a thermal curve. The LSI trip unit gives adjustable short-time delay (S) and instantaneous (I) thresholds, allowing fine-tuned coordination with downstream breakers. The IP20 finger-safe enclosure is standard for panel-mount; the breaker mounts on a backplate with a 40 mm connection pitch, front-connected both top and bottom.
Screw terminals for both line and load sides, front-connected. Thermal memory is built into the electronic trip unit — after a trip, the breaker tracks the thermal state of the protected circuit, reducing nuisance re-closure on hot conductors.