Schneider TransferPacT TA10D4L1004TPE automatic transfer switch, 100 A, 4 poles, 400 V AC, LCD display, fixed mount, IP40, IEC 60947-6-1.
| Parameter | Value |
|---|---|
| Control type | 4 push-buttons |
| Display type | LCD screen |
| Network type | AC |
| Range of product | TransferPacT |
| Product or component type | Automatic transfer switch |
| Voltage | Switch: 800 V Controller: 500 V |
| [Ue] rated operational voltage | 400 V AC 50/60 Hz |
| [Uimp] rated impulse withstand voltage | Switch: 6 kV Controller: 6 kV |
| [Icw] rated short-time withstand current | 5 kA during 0.1 s |
| [Ie] rated operational current | 100 A |
| [Icm] rated short-circuit making capacity | 15 kA switch-disconnector alone 400 V AC at 50 Hz 75 kA with upstream protection circuit breaker 400 V AC at 50 Hz |
| [Ith] conventional free air thermal current | 100 A at 60 °C |
| Parameter | Value |
|---|---|
| Network frequency | 50/60 Hz |
| Poles description | 4P |
| Rated duty | Uninterrupted |
| Utilization category | AC-32B |
| IP degree of protection | Front face: IP40 auto mode Inside the enclosure: IP20 manual mode |
| Mounting mode | Fixed |
| Mounting support | Plate DIN rail |
| Connection pitch | 18 mm |
| Upside connection | Screwed |
| Downside connection | Screwed |
| Pollution degree | 3 |
| Depth | 94 mm |
| Width | 310 mm |
| Height | 147 mm |
| Mechanical durability | 8000 cycles |
| Standards | IEC 60947-6-1 |
| Operating mode | Automatic Manual |
| Device application | Change source of supply |
| Transfer switch class | PC |
| Mechanical interlocking | With mechanical interlocking |
| Suitability for isolation | Yes |
| Contact position indicator | Yes |
| Number of contact position | 3 |
| Locking options description | Padlock in OFF position |
| Signal contacts composition | 1 NO + 2 NC 1 NC + 2 NO 2 NO |
| Ambient air temperature for storage | -40...85 °C |
| Ambient air temperature for operation | -25...70 °C |
The TA10D4L1004TPE is a Schneider TransferPacT Active automatic transfer switch rated 100 A at 400 V AC, 4 poles, with an LCD screen and push-button control. It is a PC-class switch (IEC 60947-6-1) with mechanical interlocking and suitability for isolation, making it a direct fit for changeover of supply in commercial or industrial low-voltage distribution.
No related articles