Skip to main content
Log in
Schneider Electric VH223NDSGL

VH223NDSGL 100 A Fusible Disconnect Switch, NEMA 4X, 304 SS

MPNVH223NDSGL
Active

SCHNEIDER ELECTRIC Safety Switch: Fusible, 100 A, Single Phase, 240V AC, 304 Stainless Steel

Schneider Electric VH223NDSGL datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

VH223NDSGL key specifications
ParameterValue
Fuse typeH or K R or J
MountingSurface
Disconnect typeFusible disconnect
Voltage rating250 V DC 240 V AC
Current rating100 A
Short-circuit current10 kA for H, K, J or R without fuse rejection clips 200 kA for R with fuse rejection clips 200 kA for J
Standard motor power rating7.5 hp at 240 V AC 50-60 Hz for 1 phase motors 15 hp at 240 V AC 50-60 Hz for 3 phase motors 15 hp at 240 V AC 50-60 Hz for 1 phase motors 30 hp at 240 V AC 50-60 Hz for 3 phase motors 20 hp at 250 V DC
Poles2
Duty ratingHeavy duty
IP ratingNEMA 4X stainless steel 304
Wire AWGAWG 12...AWG 1/0 aluminium AWG 14...AWG 1/0 copper
Electrical connectionLugs

All specifications

VH223NDSGL additional specifications
ParameterValue
Depth7.2 in (182.9 mm)
Width9.336 in (237.134 mm)
Height20.73 in (526.54 mm)
StandardsUL98 CSA C22.2 No 4 NOM-003-SCFI-2000
CertificationsUL listed file E2875
ProductSingle Throw Safety Switch
CategoryUS10DE100010
Grounding kitFactory installation
Service entranceSuitable service entrance for USA Suitable service entrance for Mexico
Tightening torque50 lbf.in (5.6 N.m) (AWG 1...AWG 3/0) 45 lbf.in (5.08 N.m) (AWG 6...AWG 4) 40 lbf.in (4.5 N.m) 0.013 in² (8.367 mm²) (AWG 8) 35 lbf.in (4.0 N.m) 0.003...0.008 in² (2.06...5.261 mm²) (AWG 14...AWG 10)
Device applicationHeavy application
Wiring configuration3-wire (2P + N)
Factory installed neutralNeutral (factory installed)

Product details

100 A, NEMA 4X, 304 SS

Rated for 100 A at 240V AC, the VH223NDSGL from Schneider carries a NEMA 4X rating with a 304 stainless steel enclosure — the spec that decides fit for corrosive, wet, or washdown environments. IP54 ingress protection and corrosion-resistant housing material back the outdoor/indoor claim without a separate cover kit.

Fusible, H & K Fuses, DPST

This fusible disconnect accepts UL fuse classes H and K, giving you flexibility in overcurrent protection selection while maintaining a DPST contact form for two-wire circuit isolation. Rated 5 hp at 240V AC, it handles motor loads within that range without derating.

Safety & Lockout Features

A quick make/break operating mechanism and viewing window let you confirm contact position without opening the enclosure. Dual cover interlock and provisions for two padlocks support lockout/tagout procedures — no extra hardware needed.

MPN
VH223NDSGL