The VW32SBCBGA050 is a 5-meter extension cable from Schneider Electric's Lexium linear motion range, terminated with a 3-pin M8 connector at one end for sensor connection. It's a straight accessory — no active electronics, no voltage drop to calculate. The 5 m length gives you enough reach to route from a sensor on a moving carriage back to a fixed junction box on the machine frame without splicing.
The 3-pin M8 connector is common on inductive proximity sensors and photoelectric sensors in the Lexium ecosystem. Pinout follows the standard M8 sensor convention — check the sensor's own wiring diagram for pin assignment (typically brown/blue/black for PNP or NPN). The cable jacket is sized for drag-chain or flex-track routing if the sensor is on a linear axis; no special shielding requirements for typical 24 VDC sensor signals over this distance.