The VW3M1C10R30 is a preassembled pulse train input (PTI) cable for the Lexium 28 servo drive family. It connects the drive's SUB-D 50-pin port to a motion controller's CN1 interface — the free-end side lands on the controller. Length is 3 m (9.8 ft), which covers most cabinet-to-cabinet runs without excess coil.
What the connector tells you about fit
The drive end uses a SUB-D 50 connector — that's the 50-pin high-density D-sub found on Lexium 28 drives. The controller end is unterminated (free end), so you land it on whatever CN1-style terminal block your motion card uses. No adapter needed on the drive side; just verify your controller's CN1 pinout matches the wiring scheme before terminating.