The Schneider Electric VW3M5100R30 is a factory-terminated power cable that connects a BSH servomotor to a Lexium 32 servo drive. It runs 3 m (9.8 ft) and carries the motor power and holding brake on a single harness: 4 x 1.0 mm² for the motor phases plus 2 x 0.75 mm² for the brake circuit.
One piece per unit — the cable arrives with the Ytech 12 connector already molded on the drive end. No separate connector kit, no field-wiring of the motor plug. Strip and terminate the motor end per the BSH terminal box layout; the brake pair is polarity-sensitive, so verify the free-wheel diode orientation on the drive brake output before powering.