The VW3M5102R200 is a preassembled power cordset — a factory-terminated cable that runs between a servo motor and its servo drive. One end carries an industrial M23 connector (the servo motor side); the other is a free end for hardwiring into the drive's power terminals. The cable composition is 4 x 2.5 mm² for the motor power phases plus 2 x 1 mm² for the holding brake or encoder feedback, all in a single jacket. At 20 m (65.6 ft), this cable covers longer panel-to-machine runs where the drive cabinet sits remote from the motor — common in conveyor lines, packaging cells, and multi-axis stations where the drive rack is centralized and the motors are distributed along the line.
Connector and fit detail
The M23 connector on the motor side is the standard round industrial interface for servo motors in the Lexium family — it mates directly to the motor's power receptacle. The free end on the drive side means the installer strips and terminates the conductors into the drive's power block, so the cable length is fixed at 20 m with no intermediate junction.