Schneider Electric VW3M8201R30 preassembled cordset for RS422 control, 3 m, between Lexium 05 servo drive (CN5) and external control.
| Parameter | Value |
|---|---|
| Accessory category | Connection accessories |
| Accessory type | Connecting cable |
| Accessory designation | Preassembled cordset for RS422 control |
| Destination / intended use | Between Lexium 05 servo drive (CN5) and external or other type of control |
| Parameter | Value |
|---|---|
| Cable length | 9.8 ft (3 m) |
| Electrical connection | Free end 1 connector Molex, 10 ways Lexium 05 side (CN5) |
The VW3M8201R30 is a preassembled cordset that carries RS422 control signals between a Lexium 05 servo drive (connector CN5) and an external or other type of controller. One end terminates in a Molex 10-way connector that mates with the drive; the other end is a free end for field wiring. Cable length is 9.8 ft (3 m).
No official successor order code is listed by the manufacturer. For a direct-fit replacement, the part must be sourced through surplus or independent distribution channels.
The cable length is 9.8 ft (3 m).
Yes, this cordset is designed for connection between a Lexium 05 servo drive (at connector CN5) and an external or other type of control.
No related articles