Overview
The VW3S8208R05 is a preassembled 1.6 m cable for pulse/direction signals between the SD326 stepper drive and a TLM2 motion controller, terminated with a 24-pole Molex on the drive side and a SUB-D 15 on the controller side. Rated for 5 V signal levels, it is part of the Lexium SD3 range and ships as a single unit (PCE).
Length comparison
At 1.6 m, the VW3S8208R05 is the shortest cable in the VW3S8208Rxx family; the VW3S8208R30 runs 9.8 m and the VW3S8208R50 runs 16.4 m, both with the same connector set and 5 V rating. If the panel layout puts the drive and controller farther apart than 1.6 m, step up to the VW3S8208R30 — same pinout, no rewiring needed.