The Telemecanique Sensors XS912RWPAM12 is an inductive proximity sensor in the XS9 series, built as a shielded M12 threaded cylindrical barrel aimed at general-purpose position detection on automation lines. It runs on 12-24V DC only — the AC voltage rating is not stated because the device is not intended for AC supply — and switches through a PNP normally-open 3-wire output terminated at an M12 connector with 4 pins. The sensing face is shielded, with a usable range of 4 to 8 mm, so target metal needs to be sized and positioned inside that window for reliable switching.
Build, sealing, and environment
The body is 303 stainless steel, which keeps the sensor in play for food-grade, washdown, and mildly corrosive fixtures rather than only dry-panel builds. Sealing is rated IP68 and IP69K, covering both long-term submersion and high-pressure hot-water washdown — useful where sanitation cycles hit the sensor face directly. Operating temperature spans -13 °F to 158 °F, so unheated outdoor cabinets and standard factory floors both sit inside the envelope. Overall height of 60 mm sets the vertical clearance the fixture must leave when the barrel is through-mounted.
Compliance documentation on record
Certifications on record are CE and cUL.