Rated torque and speed for the application
The 1FL2310-2AC01-0HB0: Rated power is 3.5 kW at 2000 rpm, with a rated torque of 16.7 Nm and a holding torque M0 of 18.1 Nm — the extra margin at zero speed matters for positioning applications where the motor holds the load at standstill. The 17-bit AS17bit absolute encoder gives position feedback that doesn't need a home cycle after power loss, which saves commissioning time on multi-axis lines. Supply voltage is 400 V 3AC, so it's a direct fit for standard European 400 V industrial mains. The shaft height of 90 mm and plain shaft with tolerance N mean the mounting flange and coupling match the IEC frame standard for this power class.
IP65 with oil seal — washdown ready
Protection class IP65 with an oil seal means the motor body and shaft entry resist water jets and oil splash — suitable for machine tools, packaging lines, or any environment where coolant or washdown fluids are present. The angular connector keeps the cable exit low-profile, which helps in tight cabinet clearances. No holding brake is fitted on this variant, so the load must be held externally or by the drive's holding torque at standstill. If your application needs a brake to prevent axis drift on power loss, this is the wrong variant — order the -0HB1 or -0HB2 suffix instead.
Compliance and documentation
RoHS compliant since January 1, 2018, and REACH Article 33 data is available on request. Export control is AL: N / ECCN: N, so no special licensing for standard industrial destinations. The packaging dimensions are 495 x 369 x 335 mm, single-piece quantity unit.