5 kW continuous, 25.2 Nm stall — sized for the S200 rack
The Siemens 1FL2310-4AC01-0HB0 is a SIMOTICS S-1FL2 servomotor in the 1FL2 family paired with the SINAMICS S200 drive, rated Pn=5 kW with a rated speed Nn of 2000 rpm, a standstill torque M0 of 25.2 Nm, and a rated torque Mn of 23.9 Nm at 400 V 3AC supply. The 90 mm shaft height, plain shaft with tolerance N, and absence of a holding brake (suffix 0HB0) define the mechanical fit — confirm the brake option against the axis design before quoting, because the no-brake variant cannot hold a vertical load at standstill without an external brake on the gearbox. Protection class IP65 with oil seal means the housing tolerates plant washdown and oily atmospheres typical of conveyor and packaging lines; the encoder is the 17-bit absolute singleturn (AS) variant read out through the angular connector.
Active production, made-to-order build class
Lifecycle stage is current and the manufacturer status is Active, so the motor is still being built against new orders rather than drawn from a last-time-buy pool. Product class C flags this as a configured, made-to-order unit that is not returnable for credit — the order code itself drives the build, and standard spares replenishment follows the BOM line on the purchase order.
Storeroom handling — what to plan for on receipt
The motor ships one per package at 495 x 369 x 335 mm, so plan a min/max level based on a single-unit carton footprint rather than a bulk bin; the connector ships separately and is fitted during panel-side integration. Mounting the 1FL2 against the SINAMICS S200 is the intended drive pairing; the encoder cable and power cable route through the angular connector at the rear of the motor, and the IP65 rating is maintained only when the connector face and cable gland are seated to spec.