The 1FL2310-4AC11-0HB0: Rated at 5 kW continuous power with a rated speed of 2000 rpm, this servomotor delivers 23.9 Nm of continuous torque — enough to drive a moderate-inertia load like a conveyor or spindle without oversizing the drive. The holding torque of 25.2 Nm (M0) and the integrated holding brake mean the motor holds position on a vertical axis when power is removed — no external brake resistor or mechanical lock needed. Shaft height 90 mm with a plain shaft (no keyway) and tolerance N — this is a standard IEC frame dimension, so it bolts into most 90 mm flange-mount gearboxes and brackets without adapter plates.
IP65 with oil seal — washdown-ready for food or wet lines
IP65 protection with an oil seal at the shaft exit means the motor body and encoder survive hose-down cleaning and condensation in food-processing or machining environments where coolant mist is present. The angular connector (AS17bit encoder) is a single-cable solution — power and feedback run through one connector, reducing cable routing complexity and potential failure points on the machine.
RoHS compliant since 2018-01-01, with REACH Article 33 data available — the compliance documentation covers EU substance restrictions for equipment shipped into regulated markets. Export control is AL:N / ECCN:N — no special license required for cross-border shipment under current regulations.