What this motor is, in one pass
Siemens 1FT2206-4AC10-0RB0-Z P90+Q01 is a SIMOTICS S-1FT2 CT-format synchronous servo: standstill torque 12 Nm, rated power 2.2 kW at 2000 r/min, delivered with a holding brake, a 2-pole resolver and a Pt1000 temperature sensor, and terminated through an M17 signal connector and an M23 power connector (cites:). Lifecycle reads active on the ordering record (cites:) and the product carries Group Code R220 / Product Group X033 (cites:,). Integration pitch: the resolver + brake + Pt1000 + M17/M23 connector stack is what binds this shaft to a SINAMICS drive — the cable set is not generic servo cable, and the drive commissioning depends on the feedback type being declared correctly so the controller's encoder configuration matches the motor.
The non-returnable caveat that drives the BOM line
The product class is recorded as 'C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit' (cites:) — meaning quantity is built to the order, not pulled from a returnable shelf stock, so any spec mismatch on receipt becomes an engineering write-off rather than a credit-memo. Quantity unit is 1 Piece and packaging quantity 1 (cites:,); the -Z option code P90 on this build routes it through bulk packaging of 16 units, which is the format the factory ships multi-unit orders in rather than single retail cartons (cites:). Q01 is the option suffix in the order code itself; -Z documentation is delivered as an option sheet tied to the Z-suffix variant, so the datasheet set the buyer references must match the full P90+Q01 configuration rather than the bare 1FT2206-4AC10-0RB0 motor description.