12 Nm stall, 2.85 kW rated — what the frame size delivers
The 1FT2206-4AF10-0RB0-Z P90+Q01 is a SIMOTICS S-1FT2 CT synchronous servo motor rated M0=12 Nm stall torque and PN=2.85 kW at nN=3000 r/min, with an integrated holding brake, a 2-pole resolver feedback, and a Pt1000 winding temperature sensor — the resolver plus Pt1000 pair is the standard SINAMICS feedback configuration for compact S-1FT2 drives, with the signal connector on M17 and the power stage on M23. At 12 Nm and 2.85 kW continuous, the motor sits in the mid-power compact servo range — sized for machine-tool axes, packaging indexing heads, and small-format converting lines where the holding brake arrests vertical or cantilever loads without an external clamp.
Lifecycle posture — class C, built to order
That combination means the SKU is live in the catalog yet production is not held in shelf stock: each order is scheduled into a build slot, so lead time follows the factory queue rather than available-to-promise inventory. The order code carries the Z suffix plus two option codes — P90 specifies bulk packaging at 16 units, and Q01 is a supplementary variant descriptor. Bulk-pack runs of 16 shift the unit handling economics for panel builders doing multi-axis machine builds, where a palletised lot reduces per-unit pack cost.
Group code R220, product group X033 — the catalog identifiers
The motor carries Group Code R220 and Product Group X033 inside Siemens Drive Technology ordering data. These are the internal catalog keys the factory uses to route the order line and to validate the option-code combination at order entry — buyers reconciling a purchase-order line against the Siemens configurator match against these two fields first.
Compliance documentation on record
RoHS compliance has been declared since 11-02-21, and the part falls under REACH Art. 33 duty-to-inform per the current candidate list, with the substance data published in the Siemens Reach Information portal. Export control is classified AL:N / ECCN:N_CNDU — no export licence is required for standard commercial destinations.
Category strategy angle — consolidating or de-risking the axis
For a category strategy review, this SKU is a single-supplier Siemens line by definition: the SIMOTICS S-1FT2 frame, the SINAMICS-compatible resolver, and the M17/M23 connector set only pair cleanly with Siemens drives and Siemens cable assemblies. Spend under management on this axis benefits from a multi-year volume commitment in exchange for build-slot priority, but it does not de-risk the supply base on its own — a second-source axis from a different motor family is the realistic hedge.