What you're holding
The ABB ACS800-U1-0011-2+P90 is the ACS800-U1 family AC drive ordered with the +P90 option suffix, sitting in the Motor Drives line under Drives and the broader Motors & Motor Controls category. The +P90 code typically denotes a factory-fitted option on this ABB series — treat the suffix as part of the order string when specifying, not as an accessory to add later. Catalog weight lands at 14.06 kg, which puts it firmly in the single-person-lift bracket for cabinet mounting rather than a bench-top unit.
Why the option suffix matters at the BOM line
Specifying the exact string ACS800-U1-0011-2+P90 — base code, dash, frame, and the +P90 option together — is what locks in the drive's as-shipped configuration. ABB ACS800-U1 base units are commonly ordered with software or hardware options appended as +codes, and dropping the suffix on a reorder tends to come back as a different firmware build or a missing fieldbus card. For replacement planning, match the full string from the nameplate, not just the base part.
Handling and panel-side notes
At 14.06 kg, this drive needs a cabinet rail or backplate rated for the mass with the cooling clearance ABB calls out for the ACS800-U1 family — confirm the cabinet's thermal budget and the drive's mounting orientation before lifting it onto the rail. The size class implies an integral line filter and typical ABB wall-mount footprint; allow room above and below for the cooling airflow path specified in the ACS800-U1 install guide.