Reading the order code against the ACS880-01 shelf
The ACS800-U1-0009-5: The natural cross-shop candidate inside ABB's own catalog is the ACS880-01-11A0-5, the current-platform wall-mount successor frame that replaces the ACS800-U1 generation. It is listed at 4.54 kgs, so the mechanical envelope lands in the same bracket — a panel laid out around one will accept the other with bracketry adjustment, not a re-cut. Wiring-landing replication across the ACS800-U1 and ACS880-01 lines is the buyer's call to verify against the specific kW/A frame being swapped; the order-code suffix (0009-5 vs 11A0-5) is what governs current class and any terminal pitch change.
Sourcing posture
Compliance paperwork (RoHS, REACH, UL, IEC) rides with the shipper's declaration pack when the drive is sourced new-surplus; a nameplate photo against the PO line is the usual trace evidence for the QC desk, since the legacy ABB / ASEA BROWN BOVERI mark on the data plate is what confirms authenticity.
Drop-in checklist for the controls integrator
The ACS800-U1-0009-5 ships as a stand-alone chassis drive, so the integrator's job is the surrounding kit: line reactor or EMC filter sized to the 5-series voltage class, braking chopper/resistor if the load profile is regenerative, and the fieldbus option card seated before power-up — the drive's parameter set is keyed to the option-slot population at first start. Cabinet layout: at 4.08 kgs the drive mounts on DIN-backplate or through-hole panel fasteners with clearance above and below per the ACS800-U1 manual's airflow curve; filter-mat service interval belongs on the maintenance schedule from day one.