What shows up on the BOM
The ABB ACS800-U1-0060-5+B056+E200 is a wall-mount AC drive built around the ACS800-U1 frame, ordered with the +B056 and +E200 option codes that ship from the factory as a single configured catalog line. It carries the legacy ASEA BROWN BOVERI marking on the legacy title string, but the brand of record here is ABB. It sits in the Motor Drives sub-category under Drives and the broader Motors & Motor Controls top-level grouping, which is where buyers typically look when they need to source a chassis-style variable-frequency drive for a fixed panel rather than a book-format or IP54 cabinet module.
What 34.02 kg actually means at install
The drive weighs 34.02 kg as listed, which puts it squarely in two-person-lift territory and matters at the panel-design stage: the mounting plate, the cabinet rail, and the lifting provision all need to be rated for that mass with the drive's center of gravity in mind. For a wall-mount U1 frame, that is the real load the enclosure hinge and the wall anchors carry during commissioning, not a shipping curiosity.
Where this class earns its place
Drives in this class are the workhorses behind fixed-speed process loads — pumps, fans, conveyors, mixers, extruders — where an ACS800-U1 wall-mount unit typically lands as the panel-side VFD feeding an induction motor from a fixed three-phase supply. The +B056 and +E200 suffixes are application-specific option strings that the factory pre-fits to the configured order code, so they travel with the unit instead of being field-installed after delivery. Sourcing the configured +B056/+E200 build through the configured-code channel keeps the option-string intact; swapping in a base ACS800-U1 and bolting on field options is not the same BOM line and will not reproduce the original factory configuration.
Same-class sibling worth weighing
The ACS880-01-065A-5 lives in the same Motor Drives line and is the obvious newer-platform alternative for a greenfield panel — same family intent, ABB's current-generation wall-mount platform, listed at 23.13 kg versus the ACS800-U1-0060-5+B056+E200 at 34.02 kg. That is a real weight delta with real mounting consequences, and the ACS880-01 also means a different firmware/parameter toolchain, so it is a panel-design decision rather than a drop-in swap. The ACS550-U1-072A-4+B055+L512 and ACS550-U1-059A-4+B055 are listed as ACS550 family peers at 34.02 kg and 36.29 kg respectively; same mass class, different generation and option strings, and not a configured cross-reference for this order code — the buyer who needs +B056 and +E200 on the BOM should source the configured ACS800-U1 line, not retro-fit options onto an ACS550 chassis.
Sourcing posture
Send the configured order code in the RFQ; we will quote against the +B056/+E200 build as-shipped from ABB rather than as a generic ACS800-U1 chassis.