What the buyer is specifying
The ABB ACS880-01-065A-5+E202+P909 is a frequency converter on the ACS880-01 wall-mount industrial drive platform, ordered with the +E202 and +P909 option codes appended to the base part number ACS880-01-065A-5. It sits in the Motors & Motor Controls › Drives › Motor Drives class, so the base frame, current rating, and option suffixes together drive the BOM line — not the family label alone.
Option suffixes are the actual selection
The base frame code ACS880-01-065A-5 names the drive's current and voltage rating class, while +E202 and +P909 carry the field-meaningful differentiation — control interface, I/O, braking, or firmware option typically encoded in the ACS880-01 option string — and they must match whatever the BOM line, PLC slice, or option-card layout was specified against.
Cross-shop with the base-frame code
The same-frame sibling ACS880-01-065A-5 (23.13 kgs) shares this drive's electrical frame. Whether the +E202 +P909 suffixes are already represented on the base code, or the BOM needs the seed string verbatim, is decided by the option suffix — not the frame.
Application-side checks before energizing
On any ACS880-01, the gating commissioning checks stay the same regardless of suffix: confirm the supply voltage and frame rating match the nameplate, terminate the motor cable and ground at the drive end with the shield bonded to the drive's PE terminal — not floated at the motor end — and keep motor cable length within the drive's reflected-wave limit or plan for a dV/dt filter, since long runs on unfiltered IGBT outputs are the most common premature-winding failure mode on this platform. If +E202 or +P909 changes the option-card slot population, verify the slot map and firmware version before downloading the parameter set so the controller slice the integrator wrote against matches the drive that ships.