Reading the order code
The ABB ACS880-01-180A-5+D150+P940 is a wall-mount industrial drive from the ACS880-01 low-voltage family, sized at 180 A on a 3-phase 380–500 V supply rail, and it ships as a configured SKU with the +D150 and +P940 option codes already applied at the factory rather than field-retrofittable extras. Mass is 54.88 kg per the spec table, so plan a two-person lift and confirm the cabinet rail or wall-bracket is rated for that figure before mounting.
Where it sits in the family
The 180 A frame sits one notch above the ACS880-01-156A-5, which is the closest same-family neighbour and shares the ACS880-01 wall-mount footprint family; whether the 156 A panel cutout accepts the 180 A drive without rework is a mechanical question that depends on the specific enclosure, and the wiring termination positions should be checked against the mechanical drawing before treating it as a like-for-like swap. The ACS580-01-180A-4 is a different platform family from the ACS880, so it is an alternate rather than a same-frame substitute; the ACS880 is the one to stay on if the line uses the ACS880 control architecture, safety options, or fieldbus slots.
Sourcing posture
Because the +D150 and +P940 suffixes are factory-fitted at order time, this SKU is specified into the BOM and quoted to order against an RFQ — the configured suffix combination is what locks the build, so a plain 180 A base unit is not a functional equivalent even though the current rating matches.