The Delta DVP32ES200R is a DVP Series programmable logic controller with 16 inputs and 16 relay outputs, powered by a 100 ~ 240 VAC supply. The relay output method handles AC or DC loads up to the contact rating, making it suitable for switching solenoids, contactors, and small motors in a control panel. The 32-point I/O count fits medium-density applications where a mix of discrete sensors and actuators is needed.
Integration Notes
The DVP32ES200R mounts on a DIN rail inside an enclosure. The 100 ~ 240 VAC supply connects to the line-side terminals; the 16 relay outputs share a common terminal arrangement typical of the DVP series. Verify the load current per output stays within the relay's rated switching capacity — the relay contacts are rated for resistive and inductive loads per the datasheet's derating curve. The 16 inputs accept 24 VDC sinking or sourcing signals depending on the wiring configuration (SINK/SOURCE selectable per the manual).
Peer Comparison
The closest functional sibling is the DVP32ES200T, which shares the same 16-input / 16-output count and 100 ~ 240 VAC supply but uses transistor (sinking) outputs instead of relay. The DVP32ES200R drops into the same panel footprint and wiring scheme as the DVP32ES200T — the base unit dimensions and terminal layout are identical. The choice between relay and transistor outputs governs the load type: relay for AC or mixed loads up to the contact rating, transistor for high-speed DC switching (e.g., stepper drives or valve manifolds) where cycle life matters.