Delta DVP Series, ES Series standard PLC, Main Processing Unit (Base Unit), PLC Model DVP40ES00T2, 40 I/O points, current lifecycle.
| Parameter | Value |
|---|---|
| Models | Main Processing Unit (Base Unit) |
| PLC model | DVP40ES00T2 |
| Product series | DVP Series |
| Inputs+Outputs points (unit) | 40 points |
The Delta DVP40ES00T2 is a Main Processing Unit (Base Unit) in the DVP Series, classified as an ES series standard PLC with 40 I/O points. It is the controller brain for a small-to-medium automation node — think conveyor sections, packaging stations, or simple material-handling cells where you need a fixed I/O count and a ladder-logic scan cycle.
The lifecycle stage is listed as current, meaning Delta still manufactures this model as a standard catalog item.
The DVP40ES00T2 is sourced and quoted to order against an RFQ through independent distribution channels. Submit a request for quote; availability and current pricing are confirmed at that time.
The DVP40ES00R2 is the relay-output sibling — same 40 I/O points, same base-unit form factor, same DVP Series. The T2 suffix means transistor (sink/source) outputs; the R2 suffix means relay outputs. If your load type allows relay switching (resistive or low-cycle inductive), the R2 drops into the same panel footprint without rewiring the I/O base.
Mechanically yes — same base unit form factor, same 40 I/O points, same DVP Series. The difference is output type: transistor vs relay. The wiring to the output terminal block is pin-compatible, but verify the load voltage and current ratings match the transistor outputs before swapping.
No related articles