The Delta DVP60ES00T2 is a Main Processing Unit (Base Unit) from the DVP Series, classified as an ES series standard PLC. It provides 60 I/O points in a single compact chassis, making it a fit for medium-density machine control where you need a standalone controller without remote I/O racks. The transistor output variant (T2 suffix) means it switches DC loads at high speed — think solenoid valves, indicator lamps, or small contactor coils on a pick-and-place station or packaging line. That's a different sourcing decision than the relay-output sibling (DVP60ES00R2), which handles AC loads but switches slower.
The 60 I/O points are the headline count — 60 total, split between inputs and outputs. That's the hard limit for this base unit; if your machine needs more, you step up to the EH series (64-point models like DVP64EH00T2) or add an expansion module. For a standalone conveyor cell or a small packaging machine, 60 points usually covers the sensor array and actuator bank without needing a second chassis.
The transistor output variant is the one to specify if your panel already runs on 24 VDC logic; the relay-output DVP60ES00R2 is a drop-in swap only if you re-terminate the load side.