Skip to main content
Mitsubishi Electric CP30BA

Mitsubishi CP30BA Circuit Protector, 1 Pole, 2500 A, 250 V

MPN CP30BA

Mitsubishi CP30BA circuit protector, 1 pole, 2500 A, 250 V, magnetic trip system, IEC 35 mm rail mounting.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

CP30BA specifications
ParameterValue
Trip system typeMagnetic
Voltage250 volts
Insulation voltage ui250 V AC/125 V DC
Current2500 amps
Ultimate breaking icu(220 V AC) 2.5 kA
Poles1
MountingIEC 35 mm rail mounting

Product details

The Mitsubishi CP30BA is a single-pole circuit protector rated for 2500 A continuous at 250 V, using a magnetic trip system. That 2500 A rating is not a typo — it is a high-current DC or AC power distribution device, sized for main feeder or bus-bar protection rather than branch circuits. The magnetic trip responds to short-circuit events with no thermal delay, so it is suited for applications where nuisance tripping from inrush must be avoided.

Breaking capacity and insulation coordination

Ultimate breaking capacity Icu is 2.5 kA at 220 V AC — adequate for most industrial distribution panels where the upstream transformer or feeder breaker limits fault current below that level. On a 250 V DC system, the 125 V DC insulation rating means you need to verify the DC voltage does not exceed that limit, or the part is not suitable.

Mounts on standard IEC 35 mm rail — snaps into any DIN-rail panel without drilling. The single-pole form factor means it occupies one module width, leaving space for additional poles or other devices on the same rail.

MPN
CP30BA