Skip to main content
Mitsubishi Electric MR-J4-60A

Mitsubishi MR-J4-60A Servo Amplifier, 200-240V AC, 500mA Int

MPN MR-J4-60A

Mitsubishi MR-J4-60A Servo Amplifier, sine-wave PWM control, 1-phase or 3-phase 200–240 V AC, 50/60 Hz main & control circuit, 24 V DC ±10% interface at 500 mA.

$819.00 – $1,698.31 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

MR-J4-60A specifications
ParameterValue
Product typeServo Amplifier

Product details

The Mitsubishi MR-J4-60A is a servo amplifier — sine-wave PWM current control — sized for a 3-phase or single-phase 200–240 V AC mains supply at 50/60 Hz. The control circuit also takes 1-phase 200–240 V AC, so you don't need a separate transformer for the logic power. The interface side expects a regulated 24 V DC supply, ±10 %, and needs 500 mA capacity including the CN8 connector signals. That 500 mA covers the encoder and brake hold-off; undersizing the 24 V supply is a common commissioning trip.

Safety and compliance — what the ratings mean

Protection class I per IEC/EN 61800-5-1 means the drive requires a protective earth connection — the PE terminal is not optional. Overvoltage category III (IEC/EN 60664-1) tells you it's rated for fixed-installation distribution-level transients, so it can sit downstream of a branch circuit without additional surge suppression. The STO (Safe Torque Off) input shuts off energy in 8 ms — that's the time from the STO signal going low to the power stage being inert, which matters for a risk assessment under ISO 13849-1.

MPN
MR-J4-60A