Skip to main content
Omron D40P-SPC-21-M12

D40P-SPC-21-M12 Hall Effect Safety Interlock, 2NC+1NO, IP67

MPN D40P-SPC-21-M12

Allen-Bradley D40P-SPC-21-M12, Hall-Effect Coded Magnet Non-Contact Interlock Switch, 2 NC + 1 NO safety contacts, IP67, M12 connector, polyester construction.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

D40P-SPC-21-M12 specifications
ParameterValue
Product typeNon-Contact
IP ratingIP67
Connection methodM12 Connector
Temp operating max80 °C
Temp operating min-25 °C

Product details

What this switch does on a guarded access point

The D40P-SPC-21-M12 is a non-contact Hall Effect safety interlock switch built for door monitoring on machinery guards. It uses a coded magnet actuator (sold separately) to detect guard position without mechanical wear — the Hall Effect sensor reads the magnet field through the housing, so there are no plungers or levers to gum up in dusty or vibrating environments. The safety contacts are 2 NC + 1 NO, which means two normally-closed channels wired in series for the safety circuit (redundant, fault-tolerant per ISO 13849-1) and one normally-open auxiliary channel for the PLC status input. The IP67 rating and polyester body mean it shrugs off washdown and airborne grit — built for the pit, mill, or food line. The LED indicator (Yes) gives a quick visual on actuator alignment and switch state — green when the guard is closed and the magnet is within range, off when open. That saves a multimeter trip on commissioning or when troubleshooting a guard-open fault.

The M12 connector is a standard 4- or 5-pin quick-disconnect; pre-wire a cordset and swap a failed switch in minutes without re-terminating. The polyester switch construction resists corrosion from coolants, oils, and mild acids — not rated for full chemical immersion, but it handles splash and vapor in machining or processing areas.

MPN
D40P-SPC-21-M12