Skip to main content
Omron D4NL4AFAB 2

Omron D4NL4AFAB 2 Guard Locking Safety Switch, 1NO+1NC, IP67

MPN D4NL4AFAB 2

Omron D4NL Series, Guard Locking Safety-Door Switch, 1NO + 1NC, IP67, 10 A at 250 V AC, 35.5 mm depth.

$191.06 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

D4NL4AFAB 2 specifications
ParameterValue
SeriesD4NL Series
Lock typeGuard Locking
TypeSafety-Door Switch
IP ratingIP67
Depth35.5 mm
Width88.5 mm
Height95 mm

Product details

The Omron D4NL4AFAB 2 is a guard locking safety-door switch from the D4NL Series, meaning it physically locks the machine guard closed until the safety circuit releases it. This is the type of switch you spec on a hinged door or sliding gate guarding a robot cell, press brake, or packaging machine — anywhere a solenoid lock prevents access until the hazardous motion stops. The IP67 rating means the switch body and the locking mechanism are sealed against dust ingress and temporary immersion in water. On a washdown line or in a dusty mill environment, that seal keeps the internal contacts and solenoid from corroding or jamming.

Contact configuration is 1NO + 1NC — one normally-open channel for the safety monitoring circuit and one normally-closed channel for the feedback loop. The NC contact is the one that proves the door is closed and locked before the machine can start; the NO contact signals the guard position to the safety relay or PLC. Rated at 10 A switching current at 250 V AC, this switch handles the control voltage for most safety relay inputs and small solenoid loads directly. The 500,000-cycle electrical service life and 1 million-cycle mechanical service life give a solid endurance baseline for a production line running several cycles per minute. Dimensions are 88.5 mm wide, 95 mm high, and 35.5 mm deep.

This part is classified at a mature lifecycle stage, meaning it's an established, widely-installed product that Omron continues to support. It is not in a phase-out or last-time-buy window.

MPN
D4NL4AFAB 2