Skip to main content
Omron E2AS12KS04M1B2OMS

Omron E2AS12KS04M1B2OMS Inductive Sensor, NC, 4 mm, M12 Conn

MPN E2AS12KS04M1B2OMS

Omron E2A series, M12 inductive proximity sensor, normally closed (NC), flush mount, 4 mm sensing distance, M12 4-pin connector, stainless steel, IP67/IP69K.

$122.88 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

E2AS12KS04M1B2OMS specifications
ParameterValue
SeriesE2 A
Current10 mA
Frequency1 kHz
IP ratingIP67 / IP69K
MountingFlush Mount
Width17 mm
Height17 mm
Housing materialStainless Steel
Length48 mm
Construction formM12

Product details

The Omron E2AS12KS04M1B2OMS is a flush-mount M12 tubular inductive sensor rated for 4 mm sensing distance with a normally closed (NC) output. It runs on 10–32 VDC, sinks up to 200 mA at 1 kHz switching frequency, and is housed in stainless steel rated IP67/IP69K — meaning it withstands high-pressure washdown in clean-in-place zones. For a procurement decision, the key constraint is the NC logic: the output opens when a target is present, so the safety or control circuit must be wired accordingly. The flush mount allows the sensor to be embedded in metal without derating, and the M12 connector simplifies field replacement — no hardwiring at the sensor head.

Peer E2AS12KS04M1B1OMS shares the same sensing distance, voltage, stainless steel, and connector but outputs NO and uses a through-hole barrel. The NC vs NO difference alters fail-safe logic: the PLC input expects a closed signal when the target is absent. If your application requires an 8 mm sensing range or non-flush mounting, consider E2AS12KN08M1B1OMS — but note it is also NO output and non-flush, which demands an air gap around the sensor face to avoid false triggers.

MPN
E2AS12KS04M1B2OMS