Skip to main content
Omron E5DC-QX2ASM-002

Omron E5DC-QX2ASM-002 DIN Rail Temp Controller, PID, RS-485

MPN E5DC-QX2ASM-002
Active

Omron E5DC series, Process/Temperature Controller, E5DC-QX2ASM-002, DIN Rail mount, PID control, dual relay and voltage outputs, RS-485 Modbus.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

E5DC-QX2ASM-002 specifications
ParameterValue
SeriesE5DC
Output signalRelay (2), Voltage (External SSR)
Supply voltage100 to 240VAC
IP ratingIP20
ProtocolRS-485 (CompoWay/F, Modbus)
MountingDIN Rail
Temp operating max55 °C
Temp operating min-10 °C
Weight0.265 lb (120.2 g)
PackageBulk
Control methodOn/Off, Proportional (PID)

Product details

The E5DC-QX2ASM-002: Tuning the loop? The PID is solid for most thermal processes, but if you're chasing fast dead times, the relay outputs impose a fixed cycle time. The voltage output for an external SSR gives you a time-proportioned DC signal — pair it with a solid-state contactor if you need smooth, low-noise control for resistive heaters. Housing on a DIN rail inside a dry enclosure (IP20) means it lives in the cabinet, not on the panel door. RS-485 with Modbus gives you access to SP, PV, and tuning registers from the PLC or HMI — no need for local menu diving once the loop is set.

DIN Rail vs Panel Mount

The closest functional sibling is the panel-mount E5CC-CX2ASM-804. It shares the same voltage supply, sensor input range, and PID control, but replaces the second relay with an analog output (4-20mA). If the load needs a modulating analog signal — say a valve or a transducer — the E5CC covers that, but you lose the dedicated voltage output for an external SSR and move from DIN rail to a 45 mm square panel cutout. The E5DC is the right call when you're wiring into a DIN rail backplane inside a dry cabinet and driving a contactor or SSR with the voltage output.

MPN
E5DC-QX2ASM-002