Skip to main content
Omron F3SJ-A0770P20-TS

Omron F3SJ-A0770P20-TS Safety Light Curtain, 20mm Detection,

MPN F3SJ-A0770P20-TS
End of Life

Omron F3SJ-A series, F3SJ-A0770P20-TS, safety light curtain, finger/hand protection, 20mm detection capability, 770mm protective height, 51 beams, 15mm beam pitch, 0.2m to 9.0m operating range, IP65, 24VDC.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

F3SJ-A0770P20-TS specifications
ParameterValue
SeriesF3SJ-A
Supply voltage24 VDC
IP ratingIP65
Temp operating max55 °C
Temp operating min-10 °C
PackageBulk

Product details

The Omron F3SJ-A0770P20-TS is a Type 4 safety light curtain from the F3SJ-A series, built for finger and hand detection at a 20 mm detection capability. That 20 mm figure means it catches fingers reaching into the hazard zone — finger-protection class per IEC 61496-1 — making it suitable for guarding access points around assembly stations, packaging machinery, and robotic cells where operators need to reach in but must be stopped before contacting moving parts. The protective height of 770 mm is covered by 51 beams spaced at 15 mm pitch, giving a continuous detection plane from 0.2 m up to 9.0 m range. The 15 mm pitch is tighter than the 20 mm detection capability demands — that extra resolution buys margin against partial-beam obstruction and reduces the chance of a stationary object being missed during muting sequences.

Environmental and mounting considerations

Rated IP65 — dust-tight and protected against water jets — so the sensor heads and optics withstand washdown on food-and-beverage lines or in dusty packaging environments. The 24 VDC supply is standard for safety circuits; operating temperature from -10°C to 55°C covers most indoor factory conditions but watch for cold storage or hot press areas near the limits. Built-in blanking and muting functions are on-board, meaning you can configure fixed or floating blanking to ignore stationary fixtures (like a conveyor frame) and use muting to temporarily bypass the curtain during material pass-through without needing an external safety controller for those functions.

No broker or surplus channel is needed — this part is a standard catalog line.

MPN
F3SJ-A0770P20-TS