Skip to main content
Omron F3SJ-A1045P30

Omron F3SJ-A1045P30 Light Curtain, Hand/Arm 30mm, 1045mm

MPN F3SJ-A1045P30
End of Life

Omron F3SJ-A series safety light curtain, Hand/Arm protection, 30mm detection capability, 1045mm protective height, 42 beams, 25mm pitch, 24VDC, IP65.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

F3SJ-A1045P30 specifications
ParameterValue
SeriesF3SJ-A
Supply voltage24 VDC
IP ratingIP65
Temp operating max55 °C
Temp operating min-10 °C
PackageBulk

Product details

The Omron F3SJ-A1045P30 is a Type 4 safety light curtain from the F3SJ-A series, designed for hand and arm protection in hazardous machine zones. The 30 mm detection capability means it reliably detects a 30 mm-diameter object anywhere in the sensing field — that is finger-protection class per IEC 61496-1, so it catches hands reaching into the pinch point or press area, not just whole limbs. The protective height of 1045 mm is the actual area covered by the 42 infrared beams, spaced at a 25 mm pitch. For a vertical guarding application, that height covers the reach zone from roughly waist to shoulder height for a standing operator. The operating range spans 0.2 m to 9.0 m, so the emitter and receiver can be set up across a 9 m gap — common for large press brakes or robotic cells. The blanking and muting functions are built in, not optional add-ons. Blanking lets you disable specific beams to allow a fixed obstruction (a fixture or workpiece) through the field without triggering a stop. Muting temporarily suspends the safety output during a non-hazardous portion of the cycle, typically when a pallet or part passes through on a conveyor. Both functions require careful configuration and a risk assessment — the hardware supports them, but the integrator must validate the logic against the machine's safety requirements.

Environmental and supply constraints for panel integration

That means it withstands washdown in a packaging or food-processing line, but not submersion or high-pressure spray (IP67 or IP69K would be needed for those). The 24 VDC supply is standard for safety light curtains; verify the power supply can deliver the inrush current for the emitter-receiver pair without droop. In an unheated warehouse or cold dock area, the lower limit may be tight; the unit should be mounted away from direct drafts or radiant heat sources that push the ambient beyond 55°C.

MPN
F3SJ-A1045P30