Skip to main content
Omron F3SJ-A1195P30

Omron F3SJ-A1195P30 Safety Light Curtain, 30mm Detection, 11

MPN F3SJ-A1195P30
End of Life

Omron F3SJ-A Series safety light curtain, F3SJ-A1195P30, hand/arm protection (30mm), 1195mm protective height, 48 beams, 0.2-9.0m range, IP65, 24VDC.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

F3SJ-A1195P30 specifications
ParameterValue
SeriesF3SJ-A
Supply voltage24 VDC
IP ratingIP65
Temp operating max55 °C
Temp operating min-10 °C
PackageBulk

Product details

What this light curtain does on the line

The Omron F3SJ-A1195P30 is a Type 4 safety light curtain from the F3SJ-A series, rated for hand and arm detection with a 30 mm detection capability. That 30 mm figure means it catches fingers and hands reaching into a hazard zone — the standard finger-protection threshold per IEC 61496-1. The 1195 mm protective height and 48 beams at 25 mm pitch cover a vertical access area typical for machine loading stations, press brakes, or robotic cell perimeters. Operating range spans 0.2 m to 9.0 m, so it works in both tight reach-in applications and wider gated entries. Supply is 24 VDC, standard for safety circuits in industrial control panels. Built-in blanking and muting functions are on board. Blanking lets you optically mask fixed obstructions (like a machine frame) within the field; muting temporarily suspends the safety output during a material pass-through, which is common on conveyor infeed/outfeed stations. These are configured at commissioning, not added later via external modules.

The F3SJ-A series is Omron's compact safety light curtain family, positioned between the entry-level F3SG and the higher-spec F3SN. The 30 mm detection variant is the most common hand-protection option; the 14 mm version (finger protection) and 55 mm version (body detection) share the same form factor and mounting hardware, so a swap within the series is mechanically straightforward if the risk assessment changes.

Installation and integration notes

The IP65 rating is dust-tight and protected against water jets — not submersion, but fine for washdown zones. Mounting brackets and alignment aids are standard accessories; the emitter and receiver ship as a matched pair. The 30 mm detection capability and 1195 mm protective height mean this curtain is sized for a typical machine access opening. Beam pitch of 25 mm and 48 beams give the resolution needed to detect a hand reaching through at any angle. The 0.2 m minimum range allows mounting close to the hazard without dead zones.

MPN
F3SJ-A1195P30