Skip to main content
Omron F3SJ-B1105P25

Omron F3SJ-B1105P25 Safety Light Curtain, 25mm Detection, 11

MPN F3SJ-B1105P25
End of Life

Omron F3SJ-B Series safety light curtain, F3SJ-B1105P25, hand protection, 25mm detection capability, 1105mm protective height, 54 beams, 20mm pitch, 0.2-7.0m range, IP65, 24VDC.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

F3SJ-B1105P25 specifications
ParameterValue
SeriesF3SJ-B
Supply voltage24 VDC
IP ratingIP65
Temp operating max55 °C
Temp operating min-10 °C
PackageBulk

Product details

What the 25 mm detection means for guarding

The protective height is 1105 mm, with 54 beams at 20 mm pitch.

Range and mounting constraints

Operating range spans 0.2 m to 7.0 m, so the emitter and receiver can be spaced across a conveyor or machine cell up to 7 meters apart. The minimum 0.2 m standoff means you cannot mount the pair flush against each other — there is a dead zone close to the emitter face. IP65 rating means the housings tolerate washdown splashes and dust, suitable for food-processing or automotive assembly environments where hoses are used. Supply is 24 VDC, standard for safety circuits; plan for a dedicated safety-rated power supply or a fused tap from the machine's 24 V bus.

The F3SJ-B1105P25 carries an end-of-life (EOL) status, meaning Omron has formally discontinued this order code. No successor part number is listed in the lifecycle record. If the machine design allows a different protective height or beam count, a parametric search across the F3SJ-B family may yield an active variant, but no pin-compatible drop-in replacement is documented here.

Feature set for the integrator

Blanking and muting functions are built in, so the curtain can ignore fixed obstructions (blanking) or automatically bypass during a material pass-through cycle (muting). These are configured via the controller, not the sensor heads themselves — verify the controller model supports the feature set before wiring.

MPN
F3SJ-B1105P25