Skip to main content
Omron H3DK-HBL AC/DC24-48

Omron H3DK-HBL AC/DC24-48 Timer, Off-Delay 1-120 s, SPDT

MPN H3DK-HBL AC/DC24-48
Active

Omron H3DK-HBL AC/DC24-48, series H3DK-H, off-delay electronic timer, SPDT (1 Form C), 1 s to 120 s, 24-48 VAC/DC supply, 5 A at 250 VAC contact, DIN rail mount.

$121.93 – $148.06 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

H3DK-HBL AC/DC24-48 specifications
ParameterValue
SeriesH3DK-H
TypeMechanical Relay
Supply voltage24 to 48VAC/DC
MountingDIN Rail
PackageBox
Delay time1 Sec to 120 Sec
Timing initiate methodInput Voltage
Timing adjustment methodScrewdriver Slot

Product details

1-120 s off-delay window

The H3DK-HBL AC/DC24-48 is an off-delay timer in Omron's H3DK-H series — the timing sequence starts on input voltage removal and runs down through the 1 s to 120 s adjustment range. The screwdriver-slot adjustment on the front face sets the interval without pulling the unit off the DIN rail. The SPDT (1 Form C) contact carries 5 A at 250 VAC, which covers standard coil and indicator switching on a control panel — for heavier inductive loads the user-side suppression or a higher-rated contactor picks up the actual motor switching duty.

24-48 VAC/DC supply, panel-friendly footprint

Supply is 24 to 48 VAC/DC on a single pair, which lets the same timer drop into either a 24 VDC control rail or a 48 VAC auxiliary without a different order code. Screw terminals take the field wiring directly, and the DIN rail housing clicks onto a standard 35 mm rail inside a panel enclosure. Timing initiates from input voltage, so the off-delay starts the moment power is removed — typical for fan-run-on, post-purge, or sequential-stop logic where downstream equipment must complete a cycle after the start command drops.

Active status, quoted against the BOM

For panel builds and MRO spares, this is the kind of timer that stays in the BOM without a forced re-spec.

MPN
H3DK-HBL AC/DC24-48