Skip to main content
Omron K8AB-AS1 200/230VAC

Omron K8AB-AS1 200/230VAC Current Sensing Relay, 2-500mA

MPN K8AB-AS1 200/230VAC
Obsolete

Omron K8AB-AS1 200/230VAC, Current Sensing AC relay, Series K8AB-AS, SPDT (1 Form C) output, trip range 2-500mA AC/DC, delay 0.1-30 sec, DIN rail mount.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

K8AB-AS1 200/230VAC specifications
ParameterValue
SeriesK8AB-AS
Output signalRelay
Product typeCurrent Sensing AC
Supply voltage200 to 230VAC
MountingDIN Rail
Temp operating max60 °C
Temp operating min-20 °C
PackageBox
Delay time0.1 Sec to 30 Sec
Trip range2–500 mA AC

Product details

What this current-sensing relay does on the line

The K8AB-AS1 200/230VAC is an Omron current-sensing relay that monitors AC or DC current in a conductor and trips its SPDT output when the current crosses the setpoint. The trip range spans 2 to 500 mA AC/DC, so it catches both undercurrent (pump dry-run, belt slip) and overcurrent (load jam, shorted winding) conditions on a motor or heater circuit. The adjustable delay from 0.1 to 30 seconds lets you ignore inrush or transient spikes — set it long enough that the relay doesn't nuisance-trip on a motor start, short enough that a true fault still gets caught before the line goes down.

Ratings that decide the fit

Supply voltage is 200–230 VAC — common for European and Asian control panels running on a 220 V or 230 V phase-to-neutral rail. The relay output is rated 6 A at 250 VAC, enough to switch a contactor coil or a small motor starter directly without an interposing relay. Mounting is DIN rail, so it clips onto a standard 35 mm rail inside the panel. The operating range of -20°C to 60°C covers most indoor industrial environments, though you'll want to keep it out of direct heat from a drive or transformer if the cabinet runs near the upper limit.

Lifecycle reality — obsolete, sourced to order

Omron lists the K8AB-AS1 200/230VAC as obsolete. That means the factory no longer builds it, and the only channel for new-old-stock or surplus units is independent distribution. We source this part against an RFQ — quantities are confirmed at quote time, and the price reflects the surplus market, not a catalog list.

MPN
K8AB-AS1 200/230VAC