Skip to main content
Omron K8AKPM2

Omron K8AKPM2 Phase Monitoring Relay, 380-480V, 5A 2CO

MPN K8AKPM2

Omron K8AK-PM series phase monitoring relay, K8AKPM2, 3-phase, 380-480 VAC, phase sequence/failure/overvoltage/undervoltage detection, 5 A 2CO output, screw terminal, DIN rail mount, IP20.

$70.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

K8AKPM2 specifications
ParameterValue
SeriesK8AK-PM
Phases3-phase
IP ratingIP20
MountingDIN Rail
Depth100 mm
Width22.5 mm
Height90 mm

Product details

Phase monitoring coverage and switching capacity

The K8AKPM2 covers four phase conditions on a three-phase supply: phase sequence, phase failure, overvoltage, and undervoltage. That means a single relay handles both loss-of-phase and voltage-window faults — no need to stack separate under/overvoltage relays for basic motor or pump protection. Switching is handled by a 2CO (DPDT) contact rated 5 A at 250 VAC. The 2CO gives you one set of changeover contacts for the trip signal and a second set for a remote alarm or status feedback to the PLC — a common panel wiring pattern.

Voltage window and supply range

The operating window is 380 to 480 VAC, three-phase. The relay monitors each phase against that range — any phase falling below 380 V or rising above 480 V triggers the output. Power draw is 4.4 VA, which is low enough that the relay can share a control transformer with other panel devices without a thermal derating calculation.

Housing is 22.5 mm wide — a single DIN-rail module width — so it fits in a crowded panel without eating up rail space. Termination is via screw terminals, and the enclosure is IP20 — finger-safe but not sealed against moisture, so it belongs in a clean indoor panel, not a washdown area.

MPN
K8AKPM2